Post by: bali
the fix, with steel frames is simple, actually. Just silver braze them into place. Such work will then require re-finishing of the frame, most likely, altho heat control gel might be able to save the finish (where it shows, beyond the stock panels
In aluminum, about the best you can do is jb weld, and I'd add some pins thru the frame and into the stock panels, at other places, as insurance.
the fix, with steel frames is simple, actually. Just silver braze them into place. Such work will then require re-finishing of the frame, most likely, altho heat control gel might be able to save the finish (where it shows, beyond the stock panels
In aluminum, about the best you can do is jb weld, and I'd add some pins thru the frame and into the stock panels, at other places, as insurance.